3.Printer-specific Adjustments
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved
3-86
For Mac
Open the print dialog box. Enable the “Print Mode” - “Do not Print Blank Pages” option.
Caution after the adjustment
The adjustment may not possibly operate the following options as programmed. Therefore, pay special
attention to the combination of options.
• Booklet printing • N-up printing • Use Front Cover
• Use Back Cover • Interleave Pages
Remarks
If any data are inserted in the header or footer of a particular page on Excel or Word, even though no
data are present in the body, the page will not be recognized as a blank page. The header or footer will
be printed out.
Mac
To Next Page
Loading...
