3.Printer-specific Adjustments
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
3-89
After setting the values, perform the procedure.
(2) Register the name for what has been specified in procedure (1), in the “Basic” tab in the “Setting”
option.
Use steps (a) to (c) to register the name.
(a) Mark the “Save Current setting as” checkbox in the “Custom Color Settings” option.
(b) Enter an optional name in the “Name” option.
(c) Select the type you would like to use as the base one from among the “Image Quality Type”
options in “Original Image Quality Type”.
PCL
PS
XPS
To Next Page
Loading...
