1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 29
1 TROUBLESHOOTING FOR THE HARDWARE
3
Pull down the green lever on the right-hand unit of the
finisher.
The paper exit of the equipment opens.
4
Turn the green dial clockwise to send the paper and
remove it.
5
Return the green lever to its original position.
6
When the Hole Punch Unit is installed and used for
punching holes, while pulling the green dial toward
you, turn it to align the yellow marks on the parts.
7
Turn the upper green dial counterclockwise to remove
the misfed paper.
2
1
2
1
2
1
To Next Page
Loading...
Need help?
General
