2 BASIC OPERATION
32 Scan to E-mail
4
On the AUTHENTICATION screen, complete the user authentication.
1) Press [USER NAME] and enter the user name.
2) Press [PASSWORD] and enter the password.
3) Finally, press [OK].
Pressing each button displays an on-screen keyboard. Enter each item using the keyboard and
digital keys, and then press [OK] to set the entry.
The above screen is displayed only when the User Authentication for Scan to E-mail setting is
enabled on TopAccess by the administrator. If this screen is displayed, you must enter your user
name and password to log in to the SCAN TO E-MAIL screen. For the user name and password,
ask your network administrator.
5
Press [TO].
To Next Page
Loading...
Need help?
General
