Toshiba E-STUDIO3008A - 4.5.10 Feed cover

4
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
4 - 53
4.5.10 Feed cover
(5) Remove 2 washers [6], 1 E-ring [7], 1 gear
[8] and 1 pin [9] from the registration roller
[5].
Fig. 4-142
(1) Open the feed cover [1].
Fig. 4-143
(2) Disconnect 1 connector [2] and remove the
stopper [3].
Fig. 4-144