Toshiba E-STUDIO3008A - 6.3.3 Printer related adjustment

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
SETTING / ADJUSTMENT
6 - 8
6.3.3 Printer related adjustment
The printer related adjustment is performed by using the printed out grid pattern.
Fig.6-8 Grid pattern
Adjustment
Tolerance
Detail of adjustment
A 200 ± 0.5mm  P. 6-9 "[A] Reproduction ratio of primary scanning direction (Fine adjustment of
polygonal motor rotation speed (Printer))"
B 52 ± 0.5mm  P. 6-9 "[B] Primary scanning data laser writing start position (Printer)"
C 200 ± 0.5mm  P. 6-10 "[C] Reproduction ratio of secondary scanning direction (Fine
adjustment of main motor rotation speed (Copier/Printer))"
D 52 ± 0.5mm  P. 6-11 "[D] Secondary scanning data laser writing start position"
E 52 ± 0.5mm  P. 6-12 "[E] Primary scanning data laser writing start position at duplexing"
A
21
6
1
B, E
D
6
30 2
C
10
Feeding direction