Toshiba E-STUDIO3008A - 4.13 Removal and Installation of Options; 4.13.1 MR-4000 (Dual Scan Document Feeder)

4
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
4 - 167
4.13 Removal and Installation of Options
Important:
• Before installing or removing options, turn the main power switch off and disconnect the
power cable from the outlet.
4.13.1 MR-4000 (Dual Scan Document Feeder)
(1) Press the [Power] button on the control panel
to shut it down.
(2) Turn the main power switch of the equipment
off.
(3) Disconnect the power cable.
(4) Take off the connector cover.
Fig. 4-447
(5) Disconnect 1 connector.
Fig. 4-448
(6) Install the connector cover.
Fig. 4-449