Toshiba E-STUDIO3008A - 8.3.22 Error in Internet FAX; Scanning Function

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 246
8.3.22 Error in Internet FAX / Scanning Function
Notes:
When formatting the HDD ([5] + [C] + [POWER] -> 3 -> 1), all data in the shared folder, Electronic
Filing, Address Book, template, etc. are erased. Back up these data before the initialization. Note
that some of data cannot be backed up (Page 5-1).
[ 1 ] Internet FAX related error
[1C10] System access abnormality
[1C32] File deletion failure
[1C11] Insufficient memory
[1C12] Message reception error
[1C13] Message transmission error
[1C14] Invalid parameter
Classification Error item
Internet FAX related error System access abnormality
File deletion failure
Check item Measures
Setting • Turn the power OFF and then back ON. Perform the job in
error again.
• If the error still occurs, first, check if there are no jobs
existing and then perform the HDD formatting ([5] + [C] +
[POWER] -> 3 -> 1).
Classification Error item
Internet FAX related error Insufficient memory
Check item Measures
Setting • When there are running jobs, perform the job in error
again after the completion of the running jobs.
• If the error still occurs, turn the power OFF and then back
ON, and perform the job again.
Classification Error item
Internet FAX related error Message reception error
Message transmission error
Check item Measures
Setting • Turn the power OFF and then back ON. Perform the job in
error again.
Classification Error item
Internet FAX related error Invalid parameter
Check item Measures
Setting • When a template is used, form the template again.
• If the error still occurs, turn the power OFF and then back
ON, and perform the job again.