Toshiba E-STUDIO3008A - 4.6 Driving section; 4.6.1 Main motor (M8) <35 ppm;45 ppm;50 ppm>; 4.6.2 Main motor (M8) <20 ppm;25 ppm;30 ppm>

4
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
4 - 85
4.6 Driving section
4.6.1 Main motor (M8) <35ppm/45ppm/50ppm>
4.6.2 Main motor (M8) <20ppm/25ppm/30ppm>
(1) Remove the flywheel.
 P. 4-80 "4.5.36 Flywheel"
(2) Disconnect 2 connectors.
Fig. 4-233
(3) Remove 2 screws and take off the main
motor [1].
Fig. 4-234
(1) Remove the flywheel.
 P. 4-80 "4.5.36 Flywheel"
(2) Disconnect 2 connectors.
Fig. 4-235