Toshiba E-STUDIO3008A - 4.5.13 2 nd transport sensor (S9)

4
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
4 - 57
4.5.13 2nd transport sensor (S9)
(3) Disconnect 1 connector [3]. Release the
latch and remove the feed cover opening/
closing switch [4].
Fig. 4-154
(1) Remove the feed cover.
 P. 4-53 "4.5.10 Feed cover"
(2) Remove 4 screws. Release 3 latches [1],
and take off the cover [2].
Fig. 4-155
(3) Disconnect 1 connector [3]. Remove 2
screws and take off the cover [4].
Fig. 4-156