e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 70
4.5.25 Lower tray-up motor (M12)
4.5.26 1st drawer paper stock sensor (S10)
(1) Remove the lower tray-up motor unit.
P. 4-68 "4.5.23 Lower tray-up motor unit"
(2) Release 4 latches, and then remove the
cover [1].
Fig. 4-190
(3) Take off the lower tray-up motor [2].
Fig. 4-191
(1) Remove the upper tray-up motor unit.
P. 4-68 "4.5.22 Upper tray-up motor unit"
(2) Release 4 latches, and then remove the
cover [1].
Fig. 4-192