e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
SELF-DIAGNOSTIC MODE
5 - 22
• 20 PM SUPPORT MODE
Fig.5-10
The number of pages currently output (OUTPUT PAGES/DEVELOP COUNTS), the recommended
number of output pages for PM (PM OUTPUT PAGES/DEVELOP COUNTS), the current drive count
(DRIVE COUNTS) and the recommended drive count for PM (PM DRIVE COUNTS) are output
together with PM units. Use this list for confirming the PM units to be replaced at each PM. See the
following page for PM:
P. 7-1 "7. PREVENTIVE MAINTENANCE (PM)"
PM SUPPORT CODE LIST
20xx-xx-xx xx:xx
UNIT OUTPUT PAGES/ PM OUTPUT PAGE/ DRIVE COUNTS PM DRIVE COUNTS
DEVELOP COUNTS DEVELOP COUNTS
DRUM
2516 70000 11735 170000
DRUM BLADE
2516 70000 11735 170000
GRID
2516 70000 11735 170000
MAIN CHARGER NEEDLE
2516 70000 11735 170000
CHARGER CLEANING PAD
2516 70000 11735 170000
S/N: xxxxxxxxx
TOSHIBA e-STUDIOxxx
TOTAL: 9999999
DF TOTAL: 9999999
To Next Page
Loading...
