Toshiba e-STUDIO350 - Page 263

November 2003 © TOSHIBA TEC 14 - 13 e-STUDIO350/450 AUTOMATIC DUPLEXING UNIT
14
(3) Remove the screw and release the rear latch.
[E] ADU cover
(1) Take off the ADU, ADU inside rear cover, ADU
opening / closing switch, and paper guide
( Chapter 14.5 [A] to 14.5 [D]).
(2) Remove 4 screws and take off the ADU cover.
Fig. 14-510
[D] Paper guide
(1) Take off the ADU ( Chapter 14.5 [A]).
(2) Release the fulcrum on the front side and take
off the paper guide.
[F] Rear latch
(1) Take off the ADU, ADU inside rear cover, ADU
opening / closing switch, paper guide, and
ADU cover ( Chapter 14.5 [A] to 14.5 [E]).
(2) Remove the spring.
Fig. 14-511
Fig. 14-512
Paper guide
Screw
ADU cover
Screw
Spring
Screw
Rear latch
Fig. 14-509