e-STUDIO5520C/6520C/6530C © 2008 TOSHIBA TEC CORPORATION All rights reserved
3-14
3. Printer-specific Adjustments
3.4 To Closely Match the Color Balance on the Monitor
As viewed on the monitor
Before the adjustment After the adjustment
The color balance as viewed on the monitor
looks different from the printout.
The color balance of the printout is closely
matched with the one on the monitor
Explanation
The color balance on the printouts is initially programmed to provide the maximum color saturation within the
range of colors reproducible in printing. In general, colors, which can be reproduced, vary, depending on
whether they are reproduced on the printout or on the monitor (or depending on whether they are reproduced in
"ink" or with the "light"). Consequently, the color balance on the printout cannot be perfectly matched with the
one on the monitor. Change the "Image Quality Type" option, in order to closely match the color balance on the
printout with the one on the monitor, at a user’s request.
* This adjustment will be effective in closely matching the color balance on the printout with the one on the
monitor, if the sRGB is selected as a color space. Therefore, remember that it may not be matched with the
color balance on the monitor, which does not support sRGB or if a color space other than sRGB is selected.
On commercially available monitors, sRGB is not selected as a color space by default.
To Next Page
Loading...
Need help?
General
