e-STUDIO5520C/6520C/6530C © 2008 TOSHIBA TEC CORPORATION All rights reserved
3-105
3. Printer-specific Adjustments
3.24.3 To Print a Full-Color Original in Two Colors
To adjust the boundary between black and colors other than black
(1) Enter adjustment mode [05]. Change the values for codes [8213 to 8215] to adjust the boundary between
black and colors other than black.
* As the set value is increased, the area of "CHANGE BLACK TO" will become larger. On the other hand,
if the value is decreased, the area of "SECOND COLOR" will become larger.
Apply to [05] code Recommended value
Acceptable
value range
Default
Text 8213 8
Graphics 8214 1
Image 8215
Increase the set value to
enlarge the black area.
1 to 255
1
To Next Page
Loading...
Need help?
General
