Toshiba e-STUDIO6520c - To Adjust the Image Density in the Toner Save Mode

e-STUDIO5520C/6520C/6530C © 2008 TOSHIBA TEC CORPORATION All rights reserved
3-74
3. Printer-specific Adjustments
3.18 To Adjust the Image Density in the Toner Save Mode
Before the adjustment After the adjustment
–
The image density is too dark, even when
printing is performed in the toner save
mode.
The image density in the toner save mode
is adjustable, as desired.
 Explanation
The e-STUDIO5520C/6520C/6530C offers a toner save mode. It is intended to automatically decrease the
image density and reduce the amount of toner used. Adjust the upper limit of the image density in the toner save
mode, in order to obtain the desired image density requested by a particular user.
 Procedures
* The service technician must perform all adjustments.