e-STUDIO5520C/6520C/6530C © 2008 TOSHIBA TEC CORPORATION All rights reserved
2-37
2. Copier-specific Adjustments
2.8 To Eliminate Moiré
Before the adjustment
After the adjustment
Moiré occurs on the photo image. Moiré is eliminated and a clear copy image is
obtained.
Explanation
When an original containing photo images or gradational images (halftones) is copied, moiré sometimes occurs
on the copy. Perform adjustment regarding image processing (sharpness intensity), in order to obtain a clear
copy image, while eliminating moiré.
Procedures
* You can start with any of the procedures. But it is recommended to perform the procedures in order, as listed
below. You can use one procedure in conjunction with another. But if this changes the image quality more
than required or loses the effectiveness of the adjustment, restore the settings made in the previously used
procedure to the original ones. Then use other procedures.
* Both the service technician and the user can use procedures (1) and (2).
* Only the service technician must use procedure (3).
To Next Page
Loading...
Need help?
General
