e-STUDIO5520C/6520C/6530C © 2008 TOSHIBA TEC CORPORATION All rights reserved
2-49
2. Copier-specific Adjustments
2.11 To Make Solid Filled Bold Text (Logo) Highly Colored
Before the adjustment
After the adjustment
The solid filled graph is not highly colored
enough.
The solid filled graph becomes highly colored
and sharper.
Explanation
Solid filled bold text, such as a logo, is sometimes not highly colored on the copy. Change the original mode option,
perform copy density adjustment and level adjustment for black headline text, in order to make the solid filled
image more highly colored.
* This adjustment will have an effect only on copying in the Full color mode.
Procedures
* The procedure to use varies, depending on whether to adjust the copy image quality of a black or colored logo.
Refer to the procedure corresponding to the users particular request.
To Next Page
Loading...
Need help?
General
