e-STUDIO5520C/6520C/6530C © 2008 TOSHIBA TEC CORPORATION All rights reserved
3-66
3. Printer-specific Adjustments
3.16 To Clearly Print Thin Lines/Double Lines
Before the adjustment After the adjustment
–
Thin lines or double lines are dotted on the
printout.
The thin lines or double lines are clearly
printed out.
Explanation
When thin lines or double lines, which are laid out on a solid filled area, are printed out, they may be dotted on
the printout. Change the option on the printer driver, setting for emphasizing thin lines, in order to clearly print
them out.
Procedures
* Follow the procedure below to perform the adjustment. However, the service technician shall judge whether or
not the adjustment is to be performed in conjunction with the printer driver setting in step (1) and the [08] code
setting in step (4) after checking the printed image.
* Both the service technician and the user can use procedure (1).
* Only the service technician must use procedures (2), (3) and (4).
To Next Page
Loading...
Need help?
General
