e-STUDIO5520C/6520C/6530C © 2008 TOSHIBA TEC CORPORATION All rights reserved
3-16
3. Printer-specific Adjustments
Mac Mac
For Macintosh
* This adjustment will have an effect only on full-color printing
Open the print dialog box. Select "Photograph" from among the "Image Type" options.
* The menu to select varies according to the operating system. Refer to the table below and select the menu.
OS Menu
10.2.x "Printer Features" Ö "Feature Sets: Color settings 2" Ö "Image Type"
10.3.x / 10.4.x/10.5x "Color Settings 1" Ö "Image Type"
Caution after the adjustment
Nothing in particular.
Remarks
• Setting a color space to sRGB is a prerequisite to maximize the effectiveness of this adjustment. Therefore, if
the monitor does not support sRGB or if color management cannot be performed, the effectiveness of the
adjustment may be significantly lost.
• In general, it is impossible to reproduce color saturation closely matching the true colors, as viewed on the
monitor, because the range of colors reproducible in toner colors is narrower than the one on the monitor.
To Next Page
Loading...
Need help?
General
