e-STUDIO5520C/6520C/6530C © 2008 TOSHIBA TEC CORPORATION All rights reserved
3-32
3. Printer-specific Adjustments
Procedures
* Both the service technician and the user can perform all adjustments.
(1) Change the "Contrast" option on the printer driver.
• Select the desired value for contrast on a scale of -4 (Lowest) to 4 (Highest).
For Windows
* This adjustment will have an effect only on Auto or Color mode printing.
Open the property page of the printer driver. Press the [Setting] button in the "Image Quality" tab.
Change the "Contrast" option in the "Image Attribute" tab.
PCL6 PS3 XPS
To Next Page
Loading...
Need help?
General
