e-STUDIO5520C/6520C/6530C © 2008 TOSHIBA TEC CORPORATION All rights reserved
3-36
3. Printer-specific Adjustments
Mac
For Macintosh
* This adjustment will have an effect only on full-color printing.
Open the print dialog box. Set the value for "Sharpness" within a range of "1" to "4."
• Setting "4" provides the sharpest print image.
* The menu to select varies according to the operating system. Refer to the table below and select the menu.
OS Menu
10.2.x "Printer Features" Ö "Feature Sets: Color settings 4" Ö "Sharpness"
10.3.x / 10.4.x/10.5x "Color Settings 2" Ö "Sharpness"
Caution after the adjustment
The adjustment may possibly cause rough edges of the image contained in low-resolution bitmap data. As a
result, outlined edges may look shaded, black bands may appear, and toner may be scattered around the lines.
Therefore, carefully perform the adjustment, while checking the printouts.
To Next Page
Loading...
Need help?
General
