e-STUDIO5520C/6520C/6530C © 2008 TOSHIBA TEC CORPORATION All rights reserved
4-14
4. e-Filing-specific Adjustments
Scan to Box
Explanation
Initially, a full-color original is copied and stored in the e-Filing box (Copy to Box) as CMYK data or optimized
for printing on paper. But while it is being downloaded to a client PC using the File Downloader or the TWAIN
driver, it is converted into RGB data or optimized for displaying on the computer monitor. Depending on the
type of original, this CMYK-to-RGB conversion may cause out-of-registration colors or graininess on the
printout. If the image is displayed on the monitor and further edited on the PC, the image quality may be
diminished.
To store a full-color original and display it on the computer monitor, while minimizing image degradation, scan
and store it in the e-Filing box (Scan to Box). This allows it to be stored as RGB data.
* Please remember that the e-Filing functions are available only on the Windows platform, and not on the
Macintosh or UNIX platform.
Procedures
* Both the service technician and the user can perform all adjustments.
* This adjustment will have an effect only on the image stored in the Full color mode (including the Auto color mode).
(1) Scan the full-color image and store it in the e-Filing box.
* For further information regarding how to scan and store images, refer to the Operator’s Manual for e-Filing
Guide and Scanning Guide.
Caution after the adjustment
Nothing in particular.
To Next Page
Loading...
Need help?
General
