e-STUDIO5520C/6520C/6530C © 2008 TOSHIBA TEC CORPORATION All rights reserved
2-5
2. Copier-specific Adjustments
Caution after the adjustment
The adjustment may possibly cause an increase in the amount of toner used, moiré, blurred text (small, dark text
blurred), faint text (fine outlines of text shredded) diminished photo images or gradational images (less accurate
reproducibility of halftones), or in some consumption conditions of consumables, background fogging or a
decrease in the amount of developer material (carrier streaks). Therefore, carefully perform the adjustment while
checking the copy image.
Remarks
• Enter a value within the recommended value range mentioned in the procedures. Otherwise, it may cause a
loss in MFP performance, including degradation in the image quality and a reduction in the life of the
consumables.
• If you perform only step (7) above (changing the setting value of subcode "3" of code [08-2548]) as an image
quality adjustment for the black mode, it may cause an extra increase or decrease in the amount of K toner used
compared with that for the other colors, or it may create a difference in the reproducibility of halftones.
To Next Page
Loading...
Need help?
General
