e-STUDIO5520C/6520C/6530C © 2008 TOSHIBA TEC CORPORATION All rights reserved
2-62
2. Copier-specific Adjustments
Procedures
* Both the service technician and the user can perform all adjustments.
(1) Press the [BASIC] button on the Control Panel. Select "PHOTO" from among the original mode options.
* To have "PHOTO" selected from among the original mode options by default, refer to procedure (1) in 2.8
To Eliminate Moiré.
After selecting the Photo mode, copy and check the copy image quality.
If further image quality adjustments are still necessary, use the next procedure.
(2) Press the [BASIC] button on the Control Panel. Select "IMAGE SMOOTHING" from among the original
mode options.
* To have "IMAGE SMOOTHING" selected from among the original mode options by default, refer to
procedure (1) in 2.8 To Eliminate Moiré.
Caution after the adjustment
Nothing in particular.
To Next Page
Loading...
