Toshiba e-STUDIO657 - Page 190

8
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856/557/657/757/857
ERROR CODE AND TROUBLESHOOTING
8 - 189
[4611] Font download failure (reached the registration limit)
[4612] Font download failure (HDD full)
[4613] Font download failure (others)
[4621] Font deletion failure
[4F10] System abnormality
Classification Error item
Printer function error
Check item Measures
Setting
Delete one or more font already registered.
Classification Error item
Printer function error
Check item Measures
Setting
Reattempt the downloading. Recreate font data and
reattempt the downloading.
Classification Error item
Printer function error
Check item Measures
Setting
Check if the font to be deleted is registered (or preregistered) in this
equipment.
Classification Error item
Printer function error Printing was not performed successfully due to other abnormalities.
Check item Measures
Setting
1. Perform the job in error again. If the error still occurs, turn the power
OFF and then back ON, and perform the job again.
2. Collect the debug log with USB media.
 P.8-3 "8.1.2 Collection of debug logs with a USB device"
3. Initialize HDD.
Refer to step 3 and later in "[E] Replace / Format HDD" in  P.9-15
"9.2.3 Precautions and procedures when replacing the HDD".