Toshiba e-STUDIO657 - Printer

e-STUDIO557/657/757/857
50
05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce
dure
Servic
e UI
08
Setting
Mode
System Fax 3875
Address confirmation
for multiple
destinations
Refer to
contents
0-1 SYS
Enable this setting to display the address confirmation
screen before sending fax to prevent wrong
transmission when multiple destination addresses are
specified.
0: Disabled 1: Enabled
<Default value>
JPC: 1
Others: 0
1
08
Setting
Mode
Printer Laser 4004
Polygonal motor
rotation speed at
ready status
0 0~5 M
0: Rotation speed for printing
1: Rotation speed for copying
2: 10000 rpm
3: Not used
4: Not used
5: Not used
1
08
Setting
Mode
Printer
Paper
feeding
4010
Default setting of
paper source
0 0~6 SYS
0: A4/LT 1: Tandem LCF 2: 1st drawer 3: 2nd drawer 4:
3rd drawer 5: 4th drawer 6: Option LCF
1
08
Setting
Mode
Printer
Paper
feeding
Automatic change of
paper source
Auto 4011 PPC 1 1~2 SYS
Sets whether or not changing the drawer automatically
to the other drawer with the paper of the same size
when paper in the selected drawer has run out.
1: Only in the same paper direction
2: In both the same and different paper directions
1 Yes
08
Setting
Mode
Printer Laser 4012
Pre-running rotation
of polygonal motor
0 0~2 SYS
Sets whether or not switching the polygonal motor from
the standby rotation to the normal rotation when the
original is set on the RADF or the platen cover is
opened.
0: Valid (when using RADF and the original is set
manually)
1: Invalid
2: Valid (when using RADF only)
1
08
Setting
Mode
Printer Laser 4013
Polygonal motor
rotational status
switching at the Auto
Clear Mode
0 0~1 SYS
Sets whether or not switching the polygonal motor from
the normal rotation to the standby rotation at the Auto
Clear Mode. 0: Valid 1: Invalid
1
08
Setting
Mode
Printer Laser 4014
Rotational status of
polygonal motor on
standby
0 0~1 SYS
Sets the rotational status of polygonal motor on
standby.
0: Rotated (The rotation speed is set at 08-4004.)
1: Stopped
1