Toshiba e-STUDIO657 - Process

e-STUDIO557/657/757/857
62
05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce
dure
Servic
e UI
08
Setting
mode
Printer
Paper
feeding
Pre-push control of
middle paper feeding
roller
4741 Thick paper 3 0 0-1 M
Suppresses the unevenness in the positions of the
leading edge of the image in the thick paper 3 mode.
0: Disabled 1: Enabled
* Applied to: A4, A5-R, B5, B5-R, LT, LT-R, ST-R, 8.5"
SQ, 16K, 16K-R
* If “1” (enable) is set to this code, a slipping sound may
be heard from the rollers depending on the media type
or use environment.
* If the unevenness still appears after the value is
changed to “1” (enable), set “0” (disable) to this code
and take other measures such as the adjustment of the
aligning amount.
1
08
Setting
Mode
Process
Developm
ent
Toner near empty 5155
Toner near empty
threshold setting
1 0-5 M
0: The period from the appearance of the toner near-
empty sign to the actual complete consumption of the
toner is set to long.
1: Normal (Default)
2: The period from the appearance of the toner near-
empty sign to the actual complete consumption of the
toner is set to short.
4: Toner near-empty status threshold value: (%)*
5: Toner near-empty status threshold value: (Number of
sheets)*
* The toner near-empty status is displayed if the
remaining amount of toner is equal to or less than the
amount set in 08-5810/5811 (percentage or number of
sheets).
1 Yes
08
Setting
mode
Process
Developm
ent
Toner near empty 5156
Fine adjustment of
threshold for
displaying remaining
toner and toner near
empty
94 50-150 M
Adjusts the threshold value for displaying remaining
amount of toner and toner near empty.
Display threshold value = default threshold value x
setting value/100 (unit: %)
1