Toshiba e-STUDIO657 - 8.3.25 Error code “M00” appears at firmware update

e-STUDIO556/656/756/856/557/657/757/857 © 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 236
8.3.25 Error code “M00” appears at firmware update
e-STUDIO556/656/756/856
e-STUDIO557/657/757/857
Check item Measures
Switching power supply • Connector check (CN402, CN406)
• Harness check.
• Fuse check (F9)
LGC board • Board check.
• Connector check (CN344)
• Harness check.
Replace parts Remarks
Switching power supply
LGC board
Check item Measures
Switching power supply • Connector check (CN402, CN406, CN416)
• Harness check.
LGC board • Board check.
• Connector check (CN344)
• Harness check.
Replace parts Remarks
Switching power supply
LGC board