Toshiba e-STUDIO657 - Page 620

e-STUDIO557/657/757/857
51
05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce
dure
Servic
e UI
08
Setting
Mode
Printer Laser 4015
Timing of auto-
clearing of polygonal
motor pre-running
rotation
3 0~6 SYS
This setting to switch the polygonal motor to the
standby rotation when a certain period of time has
passed from the pre-running. In this code, the period of
time to switch the motor status to the standby rotation
is set.
0: 15 sec. 1: 20 sec. 2: 25 sec. 3: 30 sec. 4: 35 sec. 5:
40 sec. 6: 45 sec.
* This setting is enabled when "0" or "2" is set in 08-
4012 and also "0" is set in 08-4013. The rotational
status in the ready status can be set in 08-4014
1
08
Setting
Mode
Printer
Paper
feeding
Automatic change of
paper source
When a drawer is
specified
4016 0 PPC 0 0~1 SYS
Sets whether the automatic change of paper source is
performed or not if the drawer is specified as the paper
source and the paper in the specified drawer runs out
when coping.
0: Does not change the paper source automatically
1: Changes the paper source automatically
4 Yes
08
Setting
Mode
Printer
Paper
feeding
Automatic change of
paper source
When a drawer is
specified
4016 1 Printing/BOX printing 0 0~1 SYS
Sets whether the automatic change of paper source is
performed or not if the drawer is specified as the paper
source and the paper in the specified drawer runs out
when printing/BOX printing.
0: Does not change the paper source automatically
1: Changes the paper source automatically
4 Yes
08
Setting
Mode
Printer 4017
Polygonal motor stop
function when the
[FUNCTION CLEAR]
button is pressed
0 0~1 SYS 0: Disabled
1: Enabled
1
08
Setting
Mode
Printer
Paper
feeding
Feeding retry number
setting
1st drawer 4020 0 Plain paper 5 0~5 M
Sets the number of times of the feeding retry from the
1st drawer.
4 Yes
08
Setting
Mode
Printer
Paper
feeding
Feeding retry number
setting
1st drawer 4020 1 Others 5 0~5 M
Sets the number of times of the feeding retry from the
1st drawer.
4 Yes
08
Setting
Mode
Printer
Paper
feeding
Feeding retry number
setting
2nd drawer 4021 0 Plain paper 5 0~5 M
Sets the number of times of the feeding retry from the
2nd drawer.
4 Yes
08
Setting
Mode
Printer
Paper
feeding
Feeding retry number
setting
2nd drawer 4021 1 Others 5 0~5 M
Sets the number of times of the feeding retry from the
2nd drawer.
4 Yes