e-STUDIO556/656/756/856/557/657/757/857 © 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 198
[6121] Automatic Secure Erase failure
[6131] Clock skew failure to time server
[6150] Print log DB full
[6151] Print log DB near-full (95%)
[6152] Print log DB near-full (90%)
Classification Error item
MFP access error The automatic secure erase fails.
Check item Measures
Setting
Data overwriting failed for some reason. If the error still
occurs after rebooting the equipment, start up using the
following procedure: [3] + [C] + [POWER] -> 3. HDD formatting
-> Reinstallation of software or HDD replacement
Classification Error item
MFP access error MFP fail to verify clock with Time Server
Check item Measures
Setting
Check that the time server works properly. Moreover, log into TopAccess as
an administrator, and check that the SNTP setting is correct.
Classification Error item
MFP access error Print Log full (100% Used) Log OverWrite will be start.
Check item Measures
Setting
Perform Clear Log with TopAccess Logs > Export Logs > Print Job Log
Export.
Classification Error item
MFP access error Print Log near full (95% Used).
Check item Measures
Setting
Perform Clear Log with TopAccess Logs > Export Logs > Print Job Log
Export.
Classification Error item
MFP access error Print Log near full (90% Used).
Check item Measures
Setting
Perform Clear Log with TopAccess Logs > Export Logs > Print Job Log
Export.
To Next Page
Loading...
