e-STUDIO556/656/756/856
6
05/08 Mode Element
Item Subitem Code
Details
RAM Contents
t mode
writing start position
direction
When the value increases by "1", the writing start
position shifts to the front side by approx. 0.0423 mm.
t mode
writing start position
direction
contents
When the value increases by "1", the writing start
position shifts to the front side by approx. 0.0423 mm.
<Default value>
e-STUDIO556/656: 113
e-STUDIO756/856: 123
t mode
sideways deviation
4018 0 1st drawer 128 0-255 M
When the value increases by "1", the image shifts
toward the front side by 0.0423 mm.
t mode
sideways deviation
4018 1 2nd drawer 128 0-255 M
When the value increases by "1", the image shifts
toward the front side by 0.0423 mm.
t mode
sideways deviation
4018 2 3rd drawer 128 0-255 M
When the value increases by "1", the image shifts
toward the front side by 0.0423 mm.
t mode
sideways deviation
4018 3 4th drawer 128 0-255 M
When the value increases by "1", the image shifts
toward the front side by 0.0423 mm.
t mode
sideways deviation
4018 4 Tandem LCF 128 0-255 M
When the value increases by "1", the image shifts
toward the front side by 0.0423 mm.
t mode
sideways deviation
4018 5 Bypass feeding 128 0-255 M
When the value increases by "1", the image shifts
toward the front side by 0.0423 mm.
t mode
sideways deviation
4018 6 Option LCF 128 0-255 M
When the value increases by "1", the image shifts
toward the front side by 0.0423 mm.
t mode
writing start position
direction/Duplex
feeding
4019 0 Long size 148 0-255 M
When the value increases by "1", the image shifts
toward the front side by 0.0423 mm.
t mode
writing start position
direction/Duplex
smaller)
When the value increases by "1", the image shifts
toward the front side by 0.0423 mm.
t mode
writing start position
direction/Duplex
4019 2 Middle size 128 0-255 M
When the value increases by "1", the image shifts
toward the front side by 0.0423 mm.
t mode
Printer Image Margin adjustment PPC 4050
adjustment
When the value increases by "1", the image shifts
approx. 0.0423 mm to the trailing edge side of the
paper.
t mode
adjustment(blank
area at the left of the
paper along the paper
feeding direction)
When the value increases by "1", the image shifts
approx. 0.4 mm to the trailing edge side of the paper.
To Next Page
Loading...
