e-STUDIO556/656/756/856
51
05/08 Mode Element
Item Subitem Code
Details
RAM Contents
t mode
Processin
g
balance
adjustmen
t
PRT(black) PS/Smooth/600dpi 7315 1 Medium density 128 0-255 SYS
When the value increases, the density in the target
area becomes higher.
t mode
Processin
g
balance
adjustmen
t
PRT(black) PS/Smooth/600dpi 7315 2 High density 128 0-255 SYS
When the value increases, the density in the target
area becomes higher.
t mode
Processin
g
balance
adjustmen
t
PRT(black) PS/Detail/600dpi 7316 0 Low density 128 0-255 SYS
When the value increases, the density in the target
area becomes higher.
t mode
Processin
g
balance
adjustmen
t
PRT(black) PS/Detail/600dpi 7316 1 Medium density 128 0-255 SYS
When the value increases, the density in the target
area becomes higher.
t mode
Processin
g
balance
adjustmen
t
PRT(black) PS/Detail/600dpi 7316 2 High density 128 0-255 SYS
When the value increases, the density in the target
area becomes higher.
t mode
Processin
g
balance
adjustmen
t
PRT(black) PCL/Smooth/600dpi 7317 0 Low density 128 0-255 SYS
When the value increases, the density in the target
area becomes higher.
t mode
Processin
g
balance
adjustmen
t
PRT(black) PCL/Smooth/600dpi 7317 1 Medium density 128 0-255 SYS
When the value increases, the density in the target
area becomes higher.
t mode
Processin
g
balance
adjustmen
t
PRT(black) PCL/Smooth/600dpi 7317 2 High density 128 0-255 SYS
When the value increases, the density in the target
area becomes higher.
t mode
Processin
g
balance
adjustmen
t
PRT(black) PCL/Detail/600dpi 7318 0 Low density 128 0-255 SYS
When the value increases, the density in the target
area becomes higher.
t mode
Processin
g
balance
adjustmen
t
PRT(black) PCL/Detail/600dpi 7318 1 Medium density 128 0-255 SYS
When the value increases, the density in the target
area becomes higher.
t mode
Processin
g
balance
adjustmen
t
PRT(black) PCL/Detail/600dpi 7318 2 High density 128 0-255 SYS
When the value increases, the density in the target
area becomes higher.
To Next Page
Loading...
