Toshiba e-STUDIO657 - Page 355

e-STUDIO556/656/756/856
12
05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce
dure
Servic
e UI
08
Setting
Mode
Scanner RADF 3021
Setting for switchback
operation in mixed-
size copying using
RADF
0 0~1 M
This setting is whether the original length is detected or
not by transporting without scanning in reverse when
A4-R/FOLIO paper or LT-R/LG paper is detected in a
mixed-size copying
0: Disabled -
AMS:
A series - Judges as A4-R without transporting in
reverse with no scanning.
LT series - Judges whether it is LT-R or LG by its length
without transporting in reverse with no scanning.
APS:
A series - Judges whether it is A4-R or FOLIO without
transporting in reverse with no scanning.
LT series - Judges whether it is LT-R or LG without
transporting in reverse with no scanning.
1: Enable 1
AMS:
A series - Judges whether it is A4-R or FOLIO by
transporting without scanning in reverse to detect its
length.
LT series - Judges whether it is LT-R or LG by
transporting without scanning in reverse to detect its
length.
APS:
The same as that of APS in 0: Disabled .
1 Yes