Toshiba e-STUDIO657 - Page 367

e-STUDIO556/656/756/856
24
05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce
dure
Servic
e UI
08
Setting
Mode
Printer Paper feeding 4010
Default setting of
paper source
0 0~6 SYS
0: A4/LT 1: Tandem LCF 2: 1st drawer 3: 2nd drawer 4:
3rd drawer 5: 4th drawer 6: Option LCF
1
08
Setting
Mode
Printer Paper feeding
Automatic change of
paper source
Auto 4011 PPC 1 1~2 SYS
Sets whether or not changing the drawer automatically
to the other drawer with the paper of the same size
when paper in the selected drawer has run out.
1: Only in the same paper direction
2: In both the same and different paper directions
1 Yes
08
Setting
Mode
Printer Laser 4012
Pre-running rotation
of polygonal motor
0 0~2 SYS
Sets whether or not switching the polygonal motor from
the standby rotation to the normal rotation when the
original is set on the RADF or the platen cover is
opened.
0: Valid (when using RADF and the original is set
manually)
1: Invalid
2: Valid (when using RADF only)
1
08
Setting
Mode
Printer Laser 4013
Polygonal motor
rotational status
switching at the Auto
Clear Mode
0 0~1 SYS
Sets whether or not switching the polygonal motor from
the normal rotation to the standby rotation at the Auto
Clear Mode. 0: Valid 1: Invalid
1
08
Setting
Mode
Printer Laser 4014
Rotational status of
polygonal motor on
standby
0 0~1 SYS
Sets the rotational status of polygonal motor on
standby.
0: Rotated (The rotation speed is set at 08-4004.)
1: Stopped
1
08
Setting
Mode
Printer Laser 4015
Timing of auto-
clearing of polygonal
motor pre-running
rotation
3 0~6 SYS
This setting to switch the polygonal motor to the
standby rotation when a certain period of time has
passed from the pre-running. In this code, the period of
time to switch the motor status to the standby rotation is
set.
0: 15 sec. 1: 20 sec. 2: 25 sec. 3: 30 sec. 4: 35 sec. 5:
40 sec. 6: 45 sec.
* This setting is enabled when "0" or "2" is set in 08-
4012 and also "0" is set in 08-4013. The rotational
status in the ready status can be set in 08-4014
1
08
Setting
Mode
Printer Paper feeding
Automatic change of
paper source
When a drawer is
specified
4016 0 PPC 0 0~1 SYS
Sets whether the automatic change of paper source is
performed or not if the drawer is specified as the paper
source and the paper in the specified drawer runs out
when coping.
0: Does not change the paper source automatically
1: Changes the paper source automatically
4 Yes