e-STUDIO557/657/757/857
8
05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce
dure
Servic
e UI
t mode
adjustment(blank
area at the left of the
paper along the paper
feeding direction)
When the value increases by "1", the blank area
becomes wider by approx.0.0423 mm.
t mode
adjustment(blank
area at the right of the
paper along the paper
feeding direction)
When the value increases by "1", the blank area
becomes wider by approx.0.0423 mm.
t mode
adjustment(blank
area at the trailing
edge of the paper)
When the value increases by "1", the blank area
becomes wider by approx.0.0423 mm.
t mode
adjustment
4058 1st drawer 20 0-40 M
When the value increases by "1", the image shifts
toward the trailing edge of the paper by approx.0.4 mm.
t mode
adjustment
4059 2nd drawer 20 0-40 M
When the value increases by "1", the image shifts
toward the trailing edge of the paper by approx.0.4 mm.
t mode
adjustment
4060 3rd drawer 20 0-40 M
When the value increases by "1", the image shifts
toward the trailing edge of the paper by approx.0.4 mm.
t mode
adjustment
4061 Bypass feeding 20 0-40 M
When the value increases by "1", the image shifts
toward the trailing edge of the paper by approx.0.4 mm.
t mode
adjustment
4062 Duplex feeding 20 0-40 M
When the value increases by "1", the image shifts
toward the trailing edge of the paper by approx.0.4 mm.
t mode
adjustment
4063 Option LCF 20 0-40 M
When the value increases by "1", the image shifts
toward the trailing edge of the paper by approx.0.4 mm.
t mode
duplex copying
PPC/PRT 4064 0 Bottom margin 0 0-255 M
When the value increases by "1", the blank area
becomes wider by approx.0.0423 mm.
t mode
duplex copying
PPC/PRT 4064 1 Left margin 0 0-255 M
When the value increases by "1", the blank area
becomes wider by approx.0.0423 mm.
To Next Page
Loading...
