e-STUDIO557/657/757/857
65
05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce
dure
Servic
e UI
t mode
Processin
g
adjustmen
t
stroke adjustment
600dpi 8239 0 Default setting 0 0-3 SYS
This code is used to change the width of fine lines in
PS and PDF printing. Automatic stroke adjustment is
the function that prevents the width from changing
according to the position.
This code sets whether automatic stroke adjustment is
enabled or disabled if it is not included in the print data.
If this setting is disabled, there will be an increase in
cases in which the width of fine lines becomes thicker
by 1 dot when they are printed.
0: Disabled
1: Enabled
2: Forcibly disabled (Ignores command in printing data)
3: Forcibly enabled (Ignores command in printing data)
t mode
Processin
g
adjustmen
t
stroke adjustment
when disabled
This code is used to change the width of fine lines in
PS and PDF printing. Automatic stroke adjustment is
the function that prevents the width from changing
according to the position.
This code sets the minimum width of fine lines when
the automatic stroke adjustment is disabled. For
example, if automatic stroke adjustment is disabled and
the width of fine lines is set to "0" in the PS command,
the width of the lines becomes 1 dot if the value of this
code is set to "1"; equally, if it is set to “2”, the width of
the lines becomes 2 dots.
1: 1 dot
2: 2 dots
t mode
Processin
g
compressi
on level
NW SCN(color) 8304 0 High quality 128 0-255 SYS
When the value increases, the quality gets better, and
the file size gets larger.
t mode
Processin
g
compressi
on level
NW SCN(color) 8304 1 Standard 128 0-255 SYS
When the value increases, the quality gets better, and
the file size gets larger.
t mode
Processin
g
compressi
on level
NW SCN(color) 8304 2 Low quality 128 0-255 SYS
When the value increases, the quality gets better, and
the file size gets larger.
To Next Page
Loading...
