e-STUDIO556/656/756/856/557/657/757/857 © 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 58
[EB60] Paper remaining on the transport path
Check item Measures
Registration sensor (S18) • Sensor check (Perform the input check: 03-[FAX]ON/[4]/[E])
• Connector check
• Harness check.
1st drawer transport sensor (S33) • Sensor check (Perform the input check: 03-[FAX]OFF/[1]/[C])
• Connector check
• Harness check.
LGC board • Connector check (CN341)
• Board check.
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
Registration sensor
1st drawer transport sensor
LGC board
Rollers
Classification Error item
Paper transport jam The multiple feeding of the preceding paper caused the misfeeding of the
upcoming paper (= re-detection after no jam is detected at [EB50])
Check item Measures
Registration sensor (S18) • Sensor check (Perform the input check: 03-[FAX]ON/[4]/[E])
• Connector check
• Harness check.
LGC board • Connector check (CN341)
• Board check.
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
Registration sensor
LGC board
Rollers
To Next Page
Loading...
