Toshiba e-STUDIO657 - Page 681

e-STUDIO557/657/757/857
112
05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce
dure
Servic
e UI
08
Setting
Mode
System
User
interface
8538
Toner near empty
notification setting
0 0-1 SYS 0: Disabled
1: Enabled
1
08
Setting
Mode
System
General 8540
Date and time format
setting for Meta Scan
XML files
1 0~1 SYS
0: YYYY/MM/DDhh:mm:ss.mmm
1: YYYY-MM-DDThh:mm:ss.mmTZD
1
08
Setting
Mode
System
User
interface
8543
Switching to the low
power consumption
mode in the Sleep
mode
1 0~1 SYS 0: Does not enter 1: Enters under particular conditions 1 Yes
08
Setting
Mode
System
User
interface
8544
Tolerance for
switching to Super
Sleep mode
5 5~600 SYS
The interval between recovering from the Super Sleep
mode and making the transition to the Super Sleep
mode again. Unit: seconds.
1 Yes
08
Setting
Mode
System
User
interface
8546
Input setting of minus
value for image shift
when copying
0 0~1 SYS
Sets whether minus value can be input or not for image
shift when copying. If this setting is enabled, the minus
value can be input only for back side.
0: Inputting minus value is disabled.
1: Inputting minus value is enabled.
1 Yes
08
Setting
Mode
System
Paper
feeding
8548
Change of the paper
size setting on the
touch panel when
printing is interrupted
by size mismatch
0 0~1 SYS
0: Change of the paper size setting on the touch panel
is disabled.
1: Change of the paper size setting on the touch panel
is enabled.
1
08
Setting
Mode
System Counter 8549
Hardware key control
when external counter
is installed
0 0~1 SYS 0: No control 1: Mode switch key is disabled 1
08
Setting
Mode
System Network 8584 Email subject setting 1 0~1 SYS 0: Disabled
1: Enabled
1
08
Setting
Mode
System Network 8585
Edit setting of e-mail
subject
1 0~1 SYS 0: Not allowed
1: Allowed
1
08
Setting
Mode
System Network 8586
Addition of date and
time to email subject
1 0~1 SYS 0: Not added
1: Added
1
08
Setting
Mode
System Network 8587
Character string of
email subject
0 0~1 SYS
Switches the default character string of subject.
0: Character string at the shipment
1: Character string specified by users
1