Toshiba e-STUDIO657 - Page 683

e-STUDIO557/657/757/857
114
05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce
dure
Servic
e UI
08
Setting
Mode
System Network
Prioritized
authentication server
8610 Card 0 0-100 SYS
Sets the prioritized authentication server to be
searched (0 to 100). The servers displayed on the
screen accessed by TopAccess -> Administration ->
Maintenance -> Directory Service are numbered
beginning at the top (0 to 100).
1
08
Setting
Mode
System
User
interface
8622
Date and time
addition setting to file
name of scan to file/e-
mail
1 0-1 SYS 0: Not added
1: Added
1
08
Setting
Mode
System General 8623 0 RIP function setting 1 0-1 SYS
Enables/Disables the function related to Excel boarder
rendering of PCL6. The function is to prevent missing
lines when scaling down and inconsistent line width
when scaling up.
0: Disabled (No correction. Compliant with PCL6
language)
1: Enabled
4
08
Setting
Mode
System
User
interface
8624
Switchover of display
method of filename
3 0-3 SYS
Switches the display method of filename.
0: Displays the filename from the beginning
1: Displays the trailing characters
2: Displays the beginning and trailing characters
3: Displays the filename without abbreviation
1 Yes
08
Setting
mode
System
User
interface
8628
Job operation on the
COPY screen when
the coin controller is
connected
0 0-1 SYS
This setting enables user to move from the COPY
screen to JOB STATUS screen, and then operate jobs
during printing when the coin controller is connected.
This code is valid when the value of 08-9016 is "1".
0: Disabled
1: Enabled
1
08
Setting
Mode
System FAX 8631
Filename creation at
fax reception and
forwarding
0 0-1 SYS
0: Use address name (family-name/first-name) as
filename if multiple names are found by address book
search of TSI (sender information).
1: Use address name (family-name/first-name) as
filename only when single name is found by address
book search of TSI (sender information).
1