EasyManuals Logo

Toshiba MW24F11 Service Manual

Toshiba MW24F11
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
Set Key Operations
Remocon
Key
Standard
Time
Set
Condition
C2-1
SERVICE MODE LIST
This unit is provided with the following SERVICE MODES so you can repair, examine and adjust easily.
To enter to the SERVICE MODE function, press and hold both buttons simultaneously on the main unit or on the main unit and on
the remote control for more than the standard time (second).
Releasing of PARENTAL LOCK.
Refer to the “PARENTAL CONTROL - RATING LEVEL”.
NOTE:
The function will only work without the setting of DVD disc at
DVD mode.
STOP (DVD) 7 3
REC/OTR 4 2
Initialization of factory on DVD data.
NOTE: Do not use this for normal servicing.
The function will only work without the setting of DVD disc at
DVD mode.
VOL. (-) MIN
0
VOL. (-) MIN
3
VOL. (-) MIN 4
VOL. (-) MIN
5
VOL. (-) MIN
6
VOL. (-) MIN 1
VOL. (-) MIN 9
Releasing of V-CHIP PASSWORD.
Adjust the PG SHIFTER automatically.
Refer to the "ELECTRICAL ADJUSTMENT" (PG SHIFTER).
Adjust the PG SHIFTER manually.
Refer to the "ELECTRICAL ADJUSTMENT" (PG SHIFTER).
Adjusting of the Tracking to the center position.
POWER ON total hours and PLAY/REC total hours are displayed on
the screen.
Refer to the "PREVENTIVE CHECKS AND SERVICE INTERVALS"
(CONFIRMATION OF HOURS USED).
Can be checked of the INITIAL DATA of MEMORY IC.
Refer to the "WHEN REPLACING EEPROM (MEMORY) IC".
Display of the Adjustment MENU on the screen.
Refer to the "ELECTRICAL ADJUSTMENT" (On-Screen Display
Adjustment).
Initialization of factory data.
NOTE:
Do not use this for data normal servicing.
If you set factory initialization, the memories are reset such as
the clock setting, the channel setting, the POWER ON total
hours, and PLAY/REC total hours.
2
2
2
2
2
2
2
STOP (DVD) 9 3
Tray cannot be opened.
Refer to the “TRAY LOCK”.
NOTE: No indications on the screen when the Tray Lock is setting.
VOL. (-) MIN FF 2
The BOT, EOT, and the Reel Sensor do not work and the VCR deck
can be operated without a cassette tape.
Refer to the "PREPARATION FOR SERVICING"
TV mode
VCR mode
(Playback)
VCR mode
(Playback)
TV mode
VCR mode
(Playback)
TV mode
ALL mode
DVD mode
(No disc)
DVD mode
(Stop)
DVD mode
(No disc)
Set Key Operations
Remocon
Key
Standard
Time
Set
Condition
ALL mode

Other manuals for Toshiba MW24F11

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toshiba MW24F11 and is the answer not in the manual?

Toshiba MW24F11 Specifications

General IconGeneral
BrandToshiba
ModelMW24F11
CategoryTV DVD Combo
LanguageEnglish

Related product manuals