Toshiba PORTEGE R300 - Contents of the Test and Errors

3 Tests and Diagnostics
3-62 [CONFIDENTIAL] PORTEGE R300 Maintenance Manual (960-591)
4) The following message is displayed. Change the FD with “MB6x setup media 2” and
press Enter. The file copy from the FD to the RAM drive is started.
Please exchange FD for "MB6x setup media 2"
Press any Key to continue . . .
5) When the file copy is completed, the following test menu is displayed. Press d and
Enter. The Responder T&D is started.
************************************************************
* *
* Atheros MB6x DUT mode Maintenance T&D Menu *
* *
* d : DUT mode *
* *
* r : Responder mode *
* *
************************************************************
SELECT MODE No.(d or r) :
6) The following test menu is displayed. Select the test number.
************************************************************
* Atheros MB6x DUT mode Maintenance T&D Menu *
* 1 : SKU check of Module *
* 2 : MAC Address Check *
* 3 : Communication test of 11a mode *
* 4 : Communication test of 11a mode(Main Antenna Only) *
* 5 : Communication test of 11b mode *
* 6 : Communication test of 11b mode(Main Antenna Only) *
* 7 : Communication test of 11g mode *
* 8 : Communication test of 11g mode(Main Antenna Only) *
* 9 : All the tests of module *
* (SKU & MAC Check,11a/b/g communication test) *
* A : All the tests of module(Main Antenna Only) *
* (SKU & MAC Check,11a/b/g communication test) *
************************************************************
SELECT TEST No.(1-A) :
3.26.3 Contents of the test and errors
1. SKU check of Module
The SKU (destination) of the Wireless LAN card installed is displayed. Visually check it.
*********************************************
* *
* Module : Atheros MB62HL (MoW) *
* G-code : G360001Q210 *
* *
*********************************************
All manuals and user guides at all-guides.com