Toshiba PORTEGE R300 - Wireless LAN Antenna;Bluetooth Antenna

4.13 Wireless LAN antenna/Bluetooth antenna 4 Replacement Procedures
4.13 Wireless LAN antenna/Bluetooth antenna
Removing the Wireless LAN antenna/Bluetooth antenna
To remove the wireless LAN antenna/Bluetooth antenna, follow the steps below and refer to
Figure 4-20.
1. Peel off two glass tapes and five acetate tapes securing the wireless LAN antenna
cables and Bluetooth antenna cable.
2. Remove the wireless LAN antennas from the slot of the LCD cover.
3. Remove the Bluetooth antenna from the slot of the LCD cover, only Bluetooth
model.
Wireless LAN antenna
Bluetooth antenna
A
cetate tape
Glass tape
Figure 4-20 Removing the wireless LAN antenna/Bluetooth antenna
Installing the Wireless LAN antenna/Bluetooth antenna
To install the wireless LAN antenna/Bluetooth antenna, follow the steps below and refer to
Figure 4-20.
(Operation of Bluetooth antenna only Bluetooth model)
1. Install the wireless LAN antennas on the display assembly in place.
2. Install the Bluetooth antenna on the display assembly in place, only Bluetooth
model.
3. Stick two glass tapes and five acetate tapes to secure the wireless LAN antenna
cables and Bluetooth antenna cable.
CAUTION: Do not stack the antenna cables.
PORTÉGÉ R300 Maintenance Manual (960-591) [CONFIDENTIAL] 4-29
All manuals and user guides at all-guides.com
all-guides.com