4.4 SD card 4 Replacement Procedures
4.4 SD card
Removing the SD card
To remove the SD card, follow the steps below and refer to Figure 4-3.
CAUTION: Before you remove the SD card, refer to the card’s documentation and to
your operating system documentation for proper procedures and
precautions.
1. Push the SD card in and release it to pop the card out.
2. Grasp the SD card and pull it out.
(For an instance, SD card is described in the figure 4-3.)
SD card
Figure 4-3 Removing the SD card
Installing the SD card
To install the SD card, follow the steps below and refer to Figure 4-3.
1. Insert the SD card in the card slot.
2. Push it carefully to ensure a firm connection.
PORTÉGÉ R300 Maintenance Manual (960-591) [CONFIDENTIAL] 4-11
To Next Page
Loading...
