Toshiba PORTEGE R300 - LCD Sensor Switch Assembly

4 Replacement Procedures 4.11 LCD sensor switch assembly
4.11 LCD sensor switch assembly
Removing the LCD sensor switch assembly
To remove the LCD sensor switch assembly, follow the steps below and refer to Figure 4-16.
1. Remove following screws.
• M2×3B S-THIN HEAD screw ×1
2. Remove the LCD sensor switch assembly from entering the computer.
M2×3B S-THIN HEAD
LCD sensor switch assembly
Figure 4-16 Removing the LCD sensor switch assembly
Installing the LCD sensor switch assembly
To install the LCD sensor switch assembly, follow the steps below and refer to Figure 4-16.
1. Place the LCD sensor switch assembly on the Cover FAT assembly.
2. Secure the LCD sensor switch assembly with the following screws.
• M2×3B S-THIN HEAD screw ×1
4-24 [CONFIDENTIAL] PORTÉGÉ R300 Maintenance Manual (960-591)
All manuals and user guides at all-guides.com
all-guides.com