3 Tests and Diagnostics
3-94 [CONFIDENTIAL] PORTEGE R300 Maintenance Manual (960-591)
NOTE: *1: displayed only in Intel Core CPU model.
*2: Special affairs for a Japanese model
*3: The model corresponding to 100BASE-T is not displayed.
*4: It is the display of a 1.8-inch HDD case.
In addition, a 2.5-inch HDD case is displayed as "Serial ATA Port0."
*5: This appears in models that have a CPU supporting TPM.
Moving Within the SETUP Menu and Changing Values
1. Press Å and Æ to move between the two columns. Press ↑ and ↓ to move between
items in a column. Press Fn+↑ (PgUp) and Fn + ↓ (PgDn) to move between the
two pages.
2. Press either the Space bar or Back Space to change the value.
Accepting Changes and Exiting the SETUP Window
1. Press End to accept the changes you made.
If the changed item does not require the system to reboot, the following message is
displayed:
Are you sure? (Y/N)
If the changed item requires the system to reboot, the following message is displayed:
Are you sure? (Y/N)
The changes you made will cause the system to reboot.
2. To make other changes, press N. Repeat the steps above.
3. To accept the changes, press Y.
NOTE: You can press Esc to quit at any time without saving changes. SETUP asks you
to confirm that you do not want to save your changes. When SETUP is displayed
at the next time, the current configuration appears.
To Next Page
Loading...
