Toshiba PORTEGE R300 - Page 251

4.8 Cover FAT assembly 4 Replacement Procedures
4. Disconnect the touch pad cable and LCD sensor switch cable from the connector
CN3240 and CN3290 on the system board.
5. Remove following screws.
• M2×6BS S-THIN HEAD screw ×6
• M2×12BS S-THIN HEAD screw ×1
6. Remove the Cover FAT assembly to remove.
CN9520
CN3240
M2×12BS S-THIN HEAD
M2×6BS S-THIN HEAD
CN3290
Insulator
7
6
1
5
4
2
3
Cover FAT assembly
Figure 4-12 Removing the Cover FAT assembly (3)
PORTÉGÉ R300 Maintenance Manual (960-591) [CONFIDENTIAL] 4-19
All manuals and user guides at all-guides.com
all-guides.com