4.16 CF unit 4 Replacement Procedures
PORTÉGÉ R300 Maintenance Manual (960-591) [CONFIDENTIAL] 4-35
Installing the CF unit
To install the CF unit, follow the steps below and refer to Figure 4-25 and Figure 4-26.
1. Connect the CF cable to the CF unit.
2. Turn off the CF unit and secure the CF unit with following screws.
• M2×4BS S-THIN HEAD ×3
3. Stick a new insulator.
4. Insert the CF dummy card to the CF unit.
CAUTION: Do not reuse removed insulator.
To Next Page
Loading...
