6F3B0250
Basic Hardware and Function
153
7. Instructions
END End
Expression
[ END ]
Function
Indicates the end of main program or sub-program. Instructions after the END instruction are not
executed. At least one END instruction is necessary in a program.
Execution condition
Input Operation Output
Operand
No operand is required.
Example
Note
·
For debugging purpose, 2 or more END instructions can be written in a program.
·
Instructions after END instruction are not executed. Those steps are, however, counted as used
steps.
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
To Next Page
Loading...
