Toshiba PROSEC T1 - Page 272

270
T1/T1S User’s Manual
8. Special I/O Functions
Note) In the explanation below, P-OUT means the pulse output function.
FEDCBA9876543210
SW26 0000000000
Bit 0 < P-OUT and PWM master flag >
0: No use
1: Use
Bit 1 < P-OUT / PWM selection >
0: PWM
1: P-OUT
Bit 2 < PLS mode >
0: CW/CCW
1: Pulse/Direction (PLS/DIR)
P-OUT / PWM operation error flag
(These are not user setting items)
Bit D < PWM pulse width error >
0: Normal
1: Error
Bit E < PWM ON duty setting error >
0: Normal
1: Error
Bit F < Frequency setting error >
0: Normal
1: Error
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net